China Liebherr Pvg 350 Pump Distribution Gear for Liebherr Excavator Pvg 350b381 9269960 worm gearbox

Solution Description

Liebherr PVG 350 PUMP DISTRIBUTION Gear for LIEBHERR EXCAVATOR PVG 350B381 9269960  

LIEBHERR 10123576 VERSTELLPUMPE DPVP O 108

The company currently materials a big quantity of plunger pumps, motors, reducers and relevant spare components. The main producers are: Rexroth, hitachi, komatsu, kawasaki, caterpillar, NACHI, Toshiba, CZPT / CZPT et al
The certain types are:
 
Hitachi sequence:
HPV050 HPV080 ZX120-6 main pump (HPK055) HPV091 (EX200-2 / 3, EX120-2 solitary pump) HPV102 (EX200-5 / 6) HPV116 (EX200-1) HPV118 (ZX200-3, ZX270 main pump) and so forth.
 
excavator primary pump collection:
HPV35 (PC60) HPV55 (PC120) HPV90 (PC200-3) HPV90 (PC200-5) PHV95 (PC200-6, PC120-6 besides pump shaft) HPV132 (PC300-7, PC400-6) HPV160 (PC300 / 400-3 / 5) HPV135 PC30UU PC40-8 main pump PC50 PC60, and so on.
 
Carter (caterpillar) series:
VRD63 (CAT120) double pump SBS80 (CAT312C) major pump E200B (new) double pump AP-12 double pump AP-fourteen (CAT325C) CAT320C double pump SPK10 / ten (E200B) double pump SPV10 / ten (MS180) double pump CAT12G CAT14G / 16G CAT215 CAT245 CAT330B going for walks motor PSV450 (AP-12) walking CAT992 CAT330C strolling CAT385H.
 
KYB (kayaba) sequence:
PSVD2-16E (Shanhe Clever 1.6-2 tons) PSVD2-21C (KYB) PSVD2-21E (KYB) 4T / SVD22 little excavation principal pump PSVD2-26E / 27E (KYB) KYB-25CC (Ishikawa Island 45, CZPT K040 / K045) Ishikawa Island sixty PSVL-54 (KYB CZPT 6-ton one hundred fifty five excavator), and many others.
 
NACHI collection:
PVD-2B-32L PVD-2B-34 walking PVD-2B-34L (little dig primary pump) PVD-2B-36L / 38/40 PVD-2B-42 PVD-2B-sixty three PVD45 Fujitsu 130 PVK-2B-505 (ZAX55 main pump) YC35-6 CZPT small dig rotary motor YC35-6 CZPT little dig strolling motor PCL-200-18B (Yuchai 55 rotary) Bobcat 331 excavator ( Slewing) Bobcat 337 (going for walks motor).
 
Toshiba series:
SG02 SG571 (MFB40) SG04 (MFB80) SG08 (MFB160) SG12 SG20 (MFB250) PVB92 (PVC90RC08 / PVC70R) (Toshiba 8 tons, CZPT 8.5 tons excavator) PV090 PV092 (PV080 common) PSVS-ninety
 
Jeil Sequence:
JMV-44 / 22 JMV-53 / 34 (6-8 ton small excavator walking motor) JMF-64 JMV147 / 95 JMF-151-VBR (22SM1510117) JMF-a hundred and fifty five.
 
Liebherr series:
LPVD45 LPVD64 LPVD75 LPVD90 LPVD100 LPVD100 new (914) LPVD125 LPVD125 new LPVD140 LPVD250 LPVD260.
 
Kobelco / CZPT collection:
SK250-8 major pump SK200-1 / 3 traveling motor SK220-3 (MA340 traveling motor) SK200-6 traveling motor SK200-6 traveling new type SK320 traveling motor M3V150 (SK220-2) traveling motor SK430 traveling Motor CZPT four hundred excavator motor HD450V-2 (Kato) HD3000 DH55 (Daewoo fifty five excavator turning motor) T3X128 / CZPT three hundred-7 turning CZPT 225-7 walking CZPT DH370 turning Hyundai 60-7 turning Motor Hyundai 480 swing motor.
 
Kawasaki series:
K3SP36C (SDV36) 8-ton medium excavator major pump K3V63DT (K3V63BDT) K3V112DT K3V140DT K3V180DT K3V280 K3VG280 K3VG180 K3VL45 K5V80 K5V140 (Doosan 300-7) K5V160 (Hyundai 300-6) primary pump M2X63 M2X96 (EX200-2) M2X120 M2X146 (EX200-5) M2X150 / a hundred and seventy (EX400) M2X210 (EX270 / 280/300) M5X130
 
Nabtesco collection:
GM05VL GM05VA GM06VL (Daewoo 60 going for walks) GM07VA (Daewoo DH55, CZPT 60-7 strolling) GM08 (Komatsu sixty-3 / 5 strolling) GM09 (MSPG06-571 / PC60-7 strolling motor) GM10 GM17 (PC120-3 / 5 walking) GM18 GM23 GM30H GM35VA GM35VL (strolling motor) GM38VB (SK200-8, CZPT 1571-3 going for walks motor) DNB08.
 
Rexroth series:
A4V40 A4V56 A4V71 A4V125 A4V250 A4VFO28 A4VSO40 A4VSO71 A4VSO125 A4VSO180 A4VSO250 A4VSO355 A4VSO500 A4VF500 / A4F500 A4VG28 (A4F40 A4 A50 AVG AVG4 AVG 4 / 32R) A4VHW90 A4VTG90 charge pump (added thick variety) A4VG125 A4VG125 charge pump A4VG125 charge pump (widespread kind) A4VG125 charge pump (string A10VO28 type) A4VG12 charge pump (extra large).
 
Rexroth inclined shaft pump series:
A2F5 A2F12 A2F23 A2VK28 2VK28 A2F28 A2F55 A2F80 A2F107 A2F160 A2F200 A2V225 A2F250 A2V500 A2V915 A2F355 A2F500 A2F1000 A2FOA 23 A2FO56 A2FO63 A2FO80 A2FO90 / A2FE90 A2FO107 A2FO125 (A2FM125) A2FO160 A2FO180 A2FO200 A2FO250 A2FO500 A6V28 A7V55 / A8VA A7V58 A7V80 / A8VA7VA A7V80 A7V250 A7V355 A7V500 A6VM / A7V1000 A6VM / A7VO12 A7VO28 A7VO55 A7VO80 A7VO107 A7VO160 A6VM160 A6VE160 A6VM200 A6VM500 A7VO172 A7VO200 A7VO250 7VO.7.
 
Sauer collection:
PV20 PV21 (PVD21) PV22 PVD22 twin pumps PV23 (PVD23) PV24 SPV6 / 119 PV25 PV26 PV112 OPV27 MF16A MFO35 MF500 MPVO46 / M46 MPR63 MPV45.
 
Eaton series:
3321/3331 (Eaton 006) CZPT 3322 (EATON3322) 4621 / 4621-007 5421/5431 (Eaton 23) Scenario 1460 (CASE1460) Situation CS05A CZPT 3932-243 CZPT 6423 7621 (Eaton 24-7620) road roller (Eaton 78462).
 
Vickers collection:
PVE19 TA19 PVE21 PVH45 PVH57 PVH74 PVH81 PVH98 PVH106 (HPN-1398) PVH131 PVH141 PVB5 PVB6 PVB10 PVB15 (widespread to some PVQ32) PVB20 PVB29 PVBQA29-SR PVQ40 / fifty PVB110 TB35 B45

Make contact with US:
 

Nancy 
———————
Sale Manager

ZheJiang CZPT Imp & Exp Co. Ltd.

Insert: HangZhou City, ZheJiang Provice, China

Cellular:

 

 

 

US $19,999
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Online Support
Warranty: 12 Months
Structure: Axial Plunger Pump
Cylinder Number: Multi Cylinder
Drive Mode: Hydraulic Driven Reciprocating Pump
Pump Shaft Position: Horizontal

###

Customization:

###

Liebherr Pvg 350 Pump Distribution Gear for Liebherr Excavator Pvg 350b381 9269960 Nancy 
———————
Sale Manager

Shandong Vochains Imp & Exp Co. Ltd.

Add: Linyi City, Shandong Provice, China

Mobile: 0086 133 0539 1617

US $19,999
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Online Support
Warranty: 12 Months
Structure: Axial Plunger Pump
Cylinder Number: Multi Cylinder
Drive Mode: Hydraulic Driven Reciprocating Pump
Pump Shaft Position: Horizontal

###

Customization:

###

Liebherr Pvg 350 Pump Distribution Gear for Liebherr Excavator Pvg 350b381 9269960 Nancy 
———————
Sale Manager

Shandong Vochains Imp & Exp Co. Ltd.

Add: Linyi City, Shandong Provice, China

Mobile: 0086 133 0539 1617

Types of Bevel Gears

Bevel Gears are used in a number of industries. They are used in wheeled excavators, dredges, conveyor belts, mill actuators, and rail transmissions. A bevel gear’s spiral or angled bevel can make it suitable for confined spaces. It is also used in robotics and vertical supports of rolling mills. You can use bevel gears in food processing processes. For more information on bevel gears, read on.
gear

Spiral bevel gear

Spiral bevel gears are used to transmit power between two shafts in a 90-degree orientation. They have curved or oblique teeth and can be fabricated from various metals. Bestagear is one manufacturer specializing in medium to large spiral bevel gears. They are used in the mining, metallurgical, marine, and oil fields. Spiral bevel gears are usually made from steel, aluminum, or phenolic materials.
Spiral bevel gears have many advantages. Their mesh teeth create a less abrupt force transfer. They are incredibly durable and are designed to last a long time. They are also less expensive than other right-angle gears. They also tend to last longer, because they are manufactured in pairs. The spiral bevel gear also reduces noise and vibration from its counterparts. Therefore, if you are in need of a new gear set, spiral bevel gears are the right choice.
The contact between spiral bevel gear teeth occurs along the surface of the gear tooth. The contact follows the Hertz theory of elastic contact. This principle holds for small significant dimensions of the contact area and small relative radii of curvature of the surfaces. In this case, strains and friction are negligible. A spiral bevel gear is a common example of an inverted helical gear. This gear is commonly used in mining equipment.
Spiral bevel gears also have a backlash-absorbing feature. This feature helps secure the thickness of the oil film on the gear surface. The shaft axis, mounting distance, and angle errors all affect the tooth contact on a spiral bevel gear. Adjusting backlash helps to correct these problems. The tolerances shown above are common for bevel gears. In some cases, manufacturers make slight design changes late in the production process, which minimizes the risk to OEMs.

Straight bevel gear

Straight bevel gears are among the easiest types of gears to manufacture. The earliest method used to manufacture straight bevel gears was to use a planer equipped with an indexing head. However, improvements have been made in manufacturing methods after the introduction of the Revacycle system and the Coniflex. The latest technology allows for even more precise manufacturing. Both of these manufacturing methods are used by CZPT. Here are some examples of straight bevel gear manufacturing.
A straight bevel gear is manufactured using two kinds of bevel surfaces, namely, the Gleason method and the Klingelnberg method. Among the two, the Gleason method is the most common. Unlike other types of gear, the CZPT method is not a universal standard. The Gleason system has higher quality gears, since its adoption of tooth crowning is the most effective way to make gears that tolerate even small assembly errors. It also eliminates the stress concentration in the bevelled edges of the teeth.
The gear’s composition depends on the application. When durability is required, a gear is made of cast iron. The pinion is usually three times harder than the gear, which helps balance wear. Other materials, such as carbon steel, are cheaper, but are less resistant to corrosion. Inertia is another critical factor to consider, since heavier gears are more difficult to reverse and stop. Precision requirements may include the gear pitch and diameter, as well as the pressure angle.
Involute geometry of a straight bevel gear is often computed by varying the surface’s normal to the surface. Involute geometry is computed by incorporating the surface coordinates and the theoretical tooth thickness. Using the CMM, the spherical involute surface can be used to determine tooth contact patterns. This method is useful when a roll tester tooling is unavailable, because it can predict the teeth’ contact pattern.
gear

Hypoid bevel gear

Hypoid bevel gears are an efficient and versatile speed reduction solution. Their compact size, high efficiency, low noise and heat generation, and long life make them a popular choice in the power transmission and motion control industries. The following are some of the benefits of hypoid gearing and why you should use it. Listed below are some of the key misperceptions and false assumptions of this gear type. These assumptions may seem counterintuitive at first, but will help you understand what this gear is all about.
The basic concept of hypoid gears is that they use two non-intersecting shafts. The smaller gear shaft is offset from the larger gear shaft, allowing them to mesh without interference and support each other securely. The resulting torque transfer is improved when compared to conventional gear sets. A hypoid bevel gear is used to drive the rear axle of an automobile. It increases the flexibility of machine design and allows the axes to be freely adjusted.
In the first case, the mesh of the two bodies is obtained by fitting the hyperboloidal cutter to the desired gear. Its geometric properties, orientation, and position determine the desired gear. The latter is used if the desired gear is noise-free or is required to reduce vibrations. A hyperboloidal cutter, on the other hand, meshes with two toothed bodies. It is the most efficient option for modeling hypoid gears with noise concerns.
The main difference between hypoid and spiral bevel gears is that the hypoid bevel gear has a larger diameter than its counterparts. They are usually found in 1:1 and 2:1 applications, but some manufacturers also provide higher ratios. A hypoid gearbox can achieve speeds of three thousand rpm. This makes it the preferred choice in a variety of applications. So, if you’re looking for a gearbox with a high efficiency, this is the gear for you.

Addendum and dedendum angles

The addendum and dedendum angles of a bevel gear are used to describe the shape and depth of the teeth of the gear. Each tooth of the gear has a slightly tapered surface that changes in depth. These angles are defined by their addendum and dedendum distances. Addendum angle is the distance between the top land and the bottom surface of the teeth, while dedendum angle is the distance between the pitch surface and the bottom surface of the teeth.
The pitch angle is the angle formed by the apex point of the gear’s pitch cone with the pitch line of the gear shaft. The dedendum angle, on the other hand, is the depth of the tooth space below the pitch line. Both angles are used to measure the shape of a bevel gear. The addendum and dedendum angles are important for gear design.
The dedendum and addendum angles of a bevel gear are determined by the base contact ratio (Mc) of the two gears. The involute curve is not allowed to extend within the base diameter of the bevel gear. The base diameter is also a critical measurement for the design of a gear. It is possible to reduce the involute curve to match the involute curve, but it must be tangential to the involute curve.
The most common application of a bevel gear is the automotive differential. They are used in many types of vehicles, including cars, trucks, and even construction equipment. They are also used in the marine industry and aviation. Aside from these two common uses, there are many other uses for bevel gears. And they are still growing in popularity. But they’re a valuable part of automotive and industrial gearing systems.
gear

Applications of bevel gears

Bevel gears are used in a variety of applications. They are made of various materials depending on their weight, load, and application. For high-load applications, ferrous metals such as grey cast iron are used. These materials have excellent wear resistance and are inexpensive. For lower-weight applications, steel or non-metals such as plastics are used. Some bevel gear materials are considered noiseless. Here are some of their most common uses.
Straight bevel gears are the easiest to manufacture. The earliest method of manufacturing them was with a planer with an indexing head. Modern manufacturing methods introduced the Revacycle and Coniflex systems. For industrial gear manufacturing, the CZPT uses the Revacycle system. However, there are many types of bevel gears. This guide will help you choose the right material for your next project. These materials can withstand high rotational speeds and are very strong.
Bevel gears are most common in automotive and industrial machinery. They connect the driveshaft to the wheels. Some even have a 45-degree bevel. These gears can be placed on a bevel surface and be tested for their transmission capabilities. They are also used in testing applications to ensure proper motion transmission. They can reduce the speed of straight shafts. Bevel gears can be used in many industries, from marine to aviation.
The simplest type of bevel gear is the miter gear, which has a 1:1 ratio. It is used to change the axis of rotation. The shafts of angular miter bevel gears can intersect at any angle, from 45 degrees to 120 degrees. The teeth on the bevel gear can be straight, spiral, or Zerol. And as with the rack and pinion gears, there are different types of bevel gears.

China Liebherr Pvg 350 Pump Distribution Gear for Liebherr Excavator Pvg 350b381 9269960     worm gearboxChina Liebherr Pvg 350 Pump Distribution Gear for Liebherr Excavator Pvg 350b381 9269960     worm gearbox
editor by czh 2022-12-20

Spiral Gear

As one of the leading spiral gear manufacturers, suppliers, and exporters of mechanical products, We offer spiral gear and many other products.

Please contact us for details.

Manufacturer supplier exporter of spiral gear.

Recent Posts